Wet Blast Equipment

Abrasives Incorporated carries complete lines of blast equipment, accessories and parts to compliment our blast media products.


The Wetblast FLEX™ system helps minimize job site blast dust and gives you convenience you don’t get from traditional slurry systems. Its design and simplified set up and operation make for easier end-of-shift shutdown. By mixing the abrasive and water after it leaves the blast machine, you never have to empty a machine of a messy water/abrasive mix. Flexible set up options allow you to position the water injector either at the base of the blast machine or at the nozzle – your choice. With the injector at the nozzle, the water/abrasive mix can be adjusted at any time. You can dry-blast with the FLEX, simply remove the injector adaptor mounted at the base of the machine, and turn off air to the pump. Available as a base unit or an All-In-One system.

Additional information


Abrasives Incorporated is a distributor of Clemco®


Systems are available as a base unit or a complete package. Standard systems operate from 50 to 120 psi; low pressure (LP) systems with an extended operational range from 5 to 120 psi are available.

FLEX Bast unit: Purchase this when you already own couple blast hoses (min.1"), nozzles, and operator safety equipment. Choose your base unit to suit the threading of the nozzle you intend to use.

All-in-one FLEX System: Purchase this for a complete blast system. The package includes a base unit plus 50 feet of coupled Supa™ blast hose, a 7/16-inch orifice long-venturi nozzle, and operator safety equipment (Apollo 600 HP DLX with Clem-Cool air conditioner and CPF-20 breathing-air filter). The all-in-one system includes 6 cu.ft. capacity blast machine, 120 gallon water storage tank, and pump module mounted on a portable framed platform.


Familiar technology from Clemco®
Simple to operate
Maximum dust suppression


Single air connection controls all pneumatic functions
Water and abrasive mix outside the blast machine
Rugged, portable skid-mounted system with fork pockets and lifting eyes
Water-to-abrasive ratio control at the machine or at the nozzle
Control media ON and OFF with abrasive cut-off system
Connect to water—use from the tank or a municipal supply
Place controls at the nozzle or at the blast machine
Blast dry or wet
Fits in the back of most full-size pick-up trucks

Pin It on Pinterest